Alpine Trail E1
See this bike in a different color:
- Price: $4,899.00*
- Suspension: RockShox 35 Gold RL 29" / Rock Shock Super Deluxe Coil R
- Wheel Size : Mixed 29"/27.5"
- Frame: Aluminum
-
Size Range:
S, M, L, XL
Size Rider height range S 5'3" to 5'6" M 5'6" to 5'10" L 5'10" to 6'2" XL 6'2" to 6'4"
Specifications
-
FRAME
All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
-
FORK
Rock Shock 35 Gold RL 29", Motion Control Damper, 160mm Travel, Maxle Stealth Axle, 44mm Offset
-
SHOCK
Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
-
RIMS
Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
-
HUB REAR
Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body
-
HUB FRONT
Shimano MT-410B, 110x15mm, Centerlock Disc, 32H
-
SPOKES
14g Black Stainless Steel
-
TIRES
Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, Double Down, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8, 3C Maxx Terra, EXO+, Tubeless Compatible
-
DERAILLEUR REAR
Shimano Deore 5100 Direct Attachment, 10-Speed
-
DERAILLEUR FRONT
-
-
SHIFT LEVER
Shimano Deore M4100-R, I-Spec EV, 10-Speed
-
CRANKSET
Marin Forged Alloy 165mm Length, Narrow Wide 38T Chainring, e13 Plus Chain guide, Aluminum Plate
-
MOTOR
Shimano STEPS E7000, 250W, 60Nm
-
CHAIN
KMC X-10E, E-Bike Specific, Silver
-
CASSETTE
Shimano Deore M4100-10 10-speed 11-46T
-
BRAKES FRONT
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
-
BRAKES REAR
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor w/ Speed Sensor
-
BRAKE LEVERS
Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
-
HANDLEBAR
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
-
STEM
Marin 3D Forged Alloy, 35mm
-
GRIPS
Marin Single Clamp Locking
-
HEADSET
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
-
SEATPOST
TranzX, YSP23JL, 1x Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
-
SADDLE
Marin E-MTB Saddle
-
PEDALS
Marin MTB Plastic
-
BATTERY
BT-8035, Internal 504Wh
-
DISPLAY
SC-E7000 Display
-
SWITCH
SW-E7000 Left Hand Switch for Assist Mode Change
-
EXTRAS
Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle
Specifications, pricing, and availability are subject to change without notice.
Geometry
S | M | L | XL | |
---|---|---|---|---|
Stack | 613 | 622 | 631 | 640 |
Reach | 445 | 465 | 485 | 505 |
Headtube Angle | 63° | 63° | 63° | 63° |
Headtube Length | 100 | 110 | 120 | 130 |
Seattube Angle | 78° | 78° | 78° | 78° |
Seattube Length | 390 | 400 | 425 | 430 |
Toptube Effective | 575 | 597 | 619 | 641 |
BB Height | 340.5 | 340.5 | 340.5 | 340.5 |
BB Drop | 28 | 28 | 28 | 28 |
Chainstay | 435 | 435 | 435 | 435 |
Wheelbase | 1215 | 1239 | 1264 | 1288 |
Standover Height | 681.6 | 681.4 | 686.8 | 689.8 |
Fork Offset | 44 | 44 | 44 | 44 |
Seatpost Diameter | 30.9 | 30.9 | 30.9 | 30.9 |
Handlebar Width | 780 | 780 | 780 | 780 |
Stem Length | 35 | 35 | 35 | 35 |
Crank Length | 165 | 165 | 165 | 165 |
All lengths in millimeters
Suspension Setup
REAR SHOCK SET UP
Recommended Sag = 30%/19.5mm
Step 1: Check the coil rate chart. If you are close to the correct rate, go to step two, otherwise swap the spring for one with the correct rate (not provided).
Step 2: Sit on the bike and note the sag. On a RockShox-equipped bike, this can be seen on the shock shaft. You will likely need someone to help you.
Step 3: If sag is less than 30%, back off the preload ring on the spring one turn at at time. If sag is more than 30%, increase the preload on the spring. (Note: Never preload coil more than 5 turns).
Step 4: Adjust rebound setting to ensure proper control.
For additional information on the setup of RockShox coil shocks, visit SRAM's suspension setup and tuning guide.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Rock Shock Super Deluxe Coil R
LBS | KG | COIL LB/IN |
---|---|---|
120 | 54 | 300 |
130 | 59 | 300 |
140 | 64 | 300 |
150 | 68 | 300 |
160 | 73 | 350 |
170 | 77 | 350 |
180 | 82 | 350 |
190 | 86 | 400 |
200 | 91 | 400 |
210 | 95 | 400 |
220 | 100 | 400 |
230 | 104 | 450 |
240 | 109 | 450 |
250 | 113 | 450 |
260 | 118 | 450 |
270 | 122 | 450 |
Reviews
A brilliantly fun ebike from Marin that is built to shred trails and downhill.
Motorised radness on a budget.
This is way too fun!
You May Also Like
-
Alpine Trail E2
- Description: Wheel Size : Mixed 29"/27.5", Full Suspension | Aluminum
- Price: $6,299.00
-
Alpine Trail XR
- Description: Wheel Size : 29", Full Suspension | Aluminum
- Price: $3,829.00
-
Alpine Trail Carbon 2
- Description: Wheel Size : 29", Full Suspension | Carbon Fiber
- Price: $4,399.00