Rift Zone E XR (EU version)

See this bike in a different color:

  • Price: $7,999.00 (USD)*
  • Suspension: RockShox Lyrik Ultimate/RockShox Super Deluxe Ultimate
  • Wheel Size : 29"
  • Frame: Aluminum
  • Size Range: S, M, L, XL

Manufacturer’s suggested retail price may not include additional shipping or preparation charges. Please contact your local Marin dealer for a quote.

XR stands for EXTRA RAD. We turned the Rifty E up another notch with this one - RockShox Lyrik Ultimate fork and Super Deluxe Ultimate Shock, Vee Tire Co rubber, Shimano XT drivetrain, next-gen Shimano EP801 motor, SRAM Code 4-piston brakes. And the cherry on top? SRAM AXS wireless shifting and a wireless RockShox Reverb dropper post. Our highest spec, highest tech Rifty E ever.

Specifications

  • FRAME

    Series 4 Alloy, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

  • FORK

    RockShox Lyrik Ultimate, 150mm Travel, 29", 110x15 Maxle Stealth, 42mm Offset

  • SHOCK

    RockShox Super Deluxe Ultimate, 210x55, 25mm x M8 Hardware, Custom Tune

  • RIMS

    Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Sleeved Joint, Disc Specific, Tubeless Compatible

  • HUB REAR

    Formula DC-711, 110x15, 6-Bolt, 32H

  • HUB FRONT

    Formula DCL-3482, 4 Sealed Bearings, 148x12, XD Driver, 6-Bolt, 32H

  • SPOKES

    14g Black Stainless Steel

  • TIRES

    Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Overide E-Specific Casing

  • DERAILLEUR REAR

    SRAM GX AXS

  • SHIFT LEVER

    SRAM AXS POD

  • CRANKSET

    Shimano XT M8150, 160mm Length, 38T Steel SRAM Chainring

  • MOTOR

    Shimano EP801, 250W, 85Nm

  • CHAIN

    SRAM GX

  • CASSETTE

    SRAM CS-XS-1275, 10-52T

  • BRAKES FRONT

    SRAM Code Bronze, 4-Piston Hydraulic Disc, 203mm HS2 Rotor

  • BRAKES REAR

    SRAM Code Bronze, 4-Piston Hydraulic Disc, 180mm HS2 Rotor w/ Bolt on Speed Sensor

  • BRAKE LEVERS

    SRAM Code Bronze Stealth

  • HANDLEBAR

    Marin Trail, 35mm Clamp, 7000 Alloy Bar, 800mm Length, 20mm Rise, 5 Degree Up, 8 Degree Back

  • STEM

    Marin CNC, 35mm Length, 35mm Bar Bore

  • GRIPS

    Marin Grizzly Lock On

  • HEADSET

    FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • SEATPOST

    Rock Shox Reverb AXS with POD remote, Size S: 125mm, Size M: 150mm, Size L/XL: 170mm

  • SADDLE

    Marin eMTB

  • PEDALS

    Marin MTB Plastic

  • BATTERY

    BT-8036, Internal 630Wh

  • DISPLAY

    Shimano SC-E600

  • SWITCH

    SW-EN600L Left Hand Switch for Assist Mode Change

  • EXTRAS

    Shimano CS-EM800 Chain Guide, Shimano Battery Charger EC-E6002, CushCore Tire Inserts and Valve Stems, Marin Tire Sealant 300ml, Squeeze Top with Valve Core Removal Tool Cap

Specifications, pricing, and availability are subject to change without notice.

Technology

Rift Zone E1 toptube detail.

SERIES 4 ALUMINUM FRAME

Rift Zone E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.

Rift Zone E1 suspension detail.

MULTITRAC SUSPENSION

The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system, with 140mm of suspension for the best on-trail experience.

Shimano STEPs drive unit detail.

SHIMANO STEPS

Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Rift Zone E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.

Suspension Setup

REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

RockShox Super Deluxe Ultimate

Rider weight and air pressure
LBS KG PSI
120 54 109
130 59 119
140 64 130
150 68 141
160 73 152
170 77 164
180 82 176
190 86 188
200 91 200
210 95 213
230 104 239
240 109 252
250 113 266
260 118 280
270 122 294